黄在线免费看-国产在线拍揄自揄拍无码视频-看毛片网站-亚洲精品免费在线观看-欧美首页-一级国产片-久久久久久逼-一级真人毛片-第一色影院-色综合中文字幕-绿帽h啪肉np辣文-黄色网址你懂的-国产污污视频-日本性猛交-荡货欠c调教h-永久影院-成人午夜视频网站-国产福利免费在线观看-色啪网-国产女主播视频-狠狠欧美-国模少妇一区二区三区-女人脱下裤子让男人捅-欧美人畜-亚洲精品爱爱-久久精品国产露脸对白-欧美大奶子视频-2018国产精品

During the production and processing of aluminum castings, many abnormal conditions were discovered, such as black spots, copper-nickel coatings, and mold sticking, etc. The existence of these problems will affect the quality of the castings and thus shorten their service life. Therefore, it is necessary to identify the causes and solve them.

Firstly, when aluminum castings are polished, black spots may appear, which could be due to the formation of silicon oxide or aluminum oxide. The solution is very simple: use fresh aluminium ingots. However, the possibility of the tubular condenser lies in the release agent, such as spraying too much release agent or having an excessively high organic content in the release agent.

At the temperature of hot-melted aluminum, some of these organic substances are reduced to carbon elements, and some are transformed into organic macromolecular polymers. The mixture of these carbon molecules and polymers is contained in the surface layer when the aluminum casting is formed, becoming the black spots we see. The problem can be alleviated by reducing the concentration of the spray agent, switching to another type of spray agent, or increasing the air flow after spraying.

Secondly, the copper-nickel coating on aluminum castings can be removed through certain methods, one of which is electrolysis. At room temperature, the returned piece is used as the anode with a current density of 3 to 5A/dm 2 for electrolytic stripping. This method is prone to copper displacement after complete removal. Copper should be removed in a dilute chromic acid solution after the nickel layer has been completely removed. Another one is the chemical elimination method.

In addition, if mold sticking occurs during the production of aluminum castings, it should also be resolved as soon as possible. On the one hand, the feeding position at the feeding port can be increased to prevent excessive impact due to insufficient feeding. On the other hand, it is necessary to save mold and light. And increase the demolding Angle for quick demolding.